Please note: This vehicle comes fitted with an Indirect TPM system as standard, but can be upgraded to include a Direct system as an optional extra. If you change to tyres with a different dimension than the factory-installed ones, the TPM system must be reconfigured for these tyres. This must be done by a trained and qualified Volvo service technician.
Make: | Volvo |
---|---|
Model: | S60 Cross Country |
Model Code: | F;134 |
Date of Manufacture: | September 2015 - December 2018 |
OE Sensor Manufacturer: | CONTINENTAL |
OE Sensor Number: | 31341893 |
The following sensors are all compatible with: Volvo S60 Cross Country 2015-2018.
72-20-375
OE-R Clamp-In Sensor S086
Aftermarket OE replacement sensor. Please note a scan tool is required to gather sensor information – including the Sensor ID wh... (more)
72-21-945
T-Pro Hybrid 3.5 3200 Clamp-In Sensor
Configurable & Programmable Universal Sensors Configurable: configure in 1-3 seconds, as protocols covering a high percentage of ... (more)
72-21-946
T-Pro Hybrid 3.5 3200 Snap-In Sensor
Configurable & Programmable Universal Sensors Configurable: configure in 1-3 seconds, as protocols covering a high percentage of ... (more)
72-21-947
T-Pro Hybrid 3.5 3200 Black Clamp-In Sensor
Configurable & Programmable Universal Sensors Configurable: configure in 1-3 seconds, as protocols covering a high percentage of ... (more)
72-21-951
T-Pro Hybrid 3.5 3200 Graphite Clamp-In Sensor
Configurable & Programmable Universal Sensors Configurable: configure in 1-3 seconds, as protocols covering a high percentage of ... (more)
72-21-953
T-Pro Hybrid NFC HTS-3300 Silver Clamp-in Sensor
The NFC-Enabled Universal Sensor What Sets this Sensor Apart? Users can configure and program this sensor with their smartphones.*... (more)
72-21-954
T-Pro Hybrid NFC HTS-3300 Snap-in Sensor
The NFC-Enabled Universal Sensor What Sets this Sensor Apart? Users can configure and program this sensor with their smartphones.*... (more)
72-21-955
T-Pro Hybrid NFC HTS-3300 Black Clamp-in Sensor
The NFC-Enabled Universal Sensor What Sets this Sensor Apart? Users can configure and program this sensor with their smartphones.*... (more)
72-21-956
T-Pro Hybrid NFC HTS-3300 Graphite Clamp-in Sensor
The NFC-Enabled Universal Sensor What Sets this Sensor Apart? Users can configure and program this sensor with their smartphones.*... (more)
72-21-969
Hybrid Lite Sensor HTS-3600 Silver Clamp-In
The lite version of the Hybrid 3.5 offers the same vehicle coverage but at a lower cost. The difference between the lite and stand... (more)
72-21-982
Hybrid Lite Sensor HTS-3600 Snap-In
The lite version of the Hybrid 3.5 offers the same vehicle coverage but at a lower cost. The difference between the lite and stand... (more)
72-21-983
Hybrid Lite Sensor HTS-3600 Black Clamp-In
The lite version of the Hybrid 3.5 offers the same vehicle coverage but at a lower cost. The difference between the lite and stand... (more)
72-21-991
Hybrid Lite Sensor HTS-3600 Graphite Clamp-In
The lite version of the Hybrid 3.5 offers the same vehicle coverage but at a lower cost. The difference between the lite and stand... (more)
72-20-845
Schrader Delta EZ 2.0 Clamp-In Sensor - EU 433Mhz
Schrader programmable EZ-Sensor 2.0 433Mhz EU. Requires a TPMS diagnostic tool to program the sensor for a particular vehicle.... (more)
72-20-821
VDO Redi Sensor 2
VDO multi-protocol REDI sensor 2. Requires a TPMS diagnostic tool when vehicle relearn is OBDII. Does not require a TPMS diagnost... (more)
72-20-106
Box Of 10 Clamp-In Valves for VDO TG1C
A box of 10 Schrader clamp-in valves, with each including: 1 Valve Stem and 1 Valve Cap . These valves are suitable for use with... (more)
72-20-216
Service Kit for VDO TG1C
A single VDO service kit, which includes: 1 Nut, 1 Rubber Grommet, 1 Metal Washer, 1 Valve Cap and 1 Valve Core. This service ki... (more)
72-20-442
Box Of 10 Replacement Clamp-In Valves for VDO TG1C
A box of 10 clamp-in valves, with each including: 1 Valve Stem and 1 Valve Cap. These valves are suitable for use with VDO TG1C ... (more)
72-20-482
Box Of 10 Replacement Clamp-In Valves for VDO TG1C
A box of 10 clamp-in valves, with each including: 1 Valve Stem, 1 Nut, 1 Rubber Grommet, 1 Metal Washer, 1 Valve Cap and 1 Valve C... (more)
72-20-513
Box Of 10 Service Kits for VDO TG1C
A box of 10 service kits, with each including: 1 Nut, 1 Rubber Grommet, 1 Metal Washer, 1 Valve Cap and 1 Valve Core. This servi... (more)
You must be logged in to view relearn procedures.
Every effort is made to ensure that this page is as accurate as possible, however the information cannot be guaranteed.